Decoding Assessment Validation: Guide to Validating Assessments
Decoding Assessment Validation: Guide to Validating Assessments
Blog Article
RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.
Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.
The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation must be conducted.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
This indicates validation occurs before and after the assessment process. We will focus on the first type: assessment tool validation.
Defining the Two Types of Assessment Validation
The Meaning of Assessment Validation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
On the other side, post-assessment validation pertains to the implementation, requiring Registered Training Organisations to adhere to the Principles of Assessment and Rules of Evidence.
Our focus in this article will be on assessment tool validation.
Methods for Conducting Assessment Tool Validation
Having distinguished between the two types of validation, let’s dive into the details of assessment tool validation.
When Assessment Tool Validation Should Be Done
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
There's no necessity to wait for the next 5-year cycle validation schedule. Validate new resources immediately to ensure they are appropriate for student use.
Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:
- you update your resources
- when new training products are added on scope
- you review your course against training product updates
- when learning resources are identified as a risk during your risk assessment
ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.
How to Choose Training Products for Validation
Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.
Resources Required for Assessment Tool Validation
Instructional Resources
Since you are validating your assessment tools, you will require the entire suite of your learning resources:
Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.
Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates created apart from the workbook and marking guide. Validate them to ensure they fit the assessment task and address unit requirements.
Validation Committee
Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.
Overall, your validation panel should have:
Relevant vocational competencies and industry skills for the unit being validated
Recent expertise and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the successor version
Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
We recommend a more detailed template to inspect each unit requirement and the assessment items that correspond to them. Here is an example:
Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As mentioned in our blog post Common Problems In Assessment Tools, it’s crucial that your assessment tools enable trainers to follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?
Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?
Validity – Does the assessment here evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?
Basic Rules of Evidence
Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool verifying that the work belongs to the candidate?
Currency – Are the assessment tools based on current units of competency and modern industry practices?
Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:
Walk the Talk
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
change diapers
bottle preparation, feeding babies from bottles, and cleaning equipment
prepare solid foods and feed babies
respond suitably to baby signs and cues
settle babies for sleep and prepare them
monitor and encourage physical exploration and gross motor skills suitable for the age
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Pay Attention to Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
All or Nothing
Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What sort of information can be included in a work package?
The answer might include:
Needed resources
Relevant expenses
Time span of activities
Appointed roles and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:
Name a hazard and/or environmental concern in the work area and choose the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolating, use of engineering controls, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolating, use of engineering controls, administrative controls
Equipment or machinery – isolating, engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.
Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.